High frequency Shielding Paint >>HiFreq-Premium-Liquid / 1 liter

€59.90

Available, delivery time: 1-3 days

Stk

Product number: 1059

Product information "High frequency Shielding Paint >>HiFreq-Premium-Liquid / 1 liter"

for large-area shielding of high-frequency electromagnetic waves, low-frequency alternating electric fields and dissipation of static charges
best shielding effectiveness with the improved high frequency shielding paint HiFreq-Premium-Liquid.
very good tensile adhesion in comparison to the Biologa Danell shielding paint HiFreq-Standard-Powder + -Liquid, can therefore also be used under tiles, for example
very low-emission shielding paint for indoor and outdoor use
metal-free, physically extremely stable, durable and non-oxidising, frost-resistant
high water resistance, eleastically soft

highly electrically conductive wall coating based on synthetic resin. The paint is vapour diffusible and contains no solvents, plasticisers, low-volatile organic compounds, formaldehyde or ammonia.

HiFreq Premium Liquid adheres well to most non-greasy and load-bearing surfaces indoors and outdoors and can be easily painted or wallpapered over. Can be used under organic plasters after priming.

Painting over existing wallpaper is advisable if the shielding surface is to be removed without leaving any residue in the foreseeable future.

Possible top coats:

plastic-bonded dispersion paints Dispersion

silicate paints (KEIM - Ecosil, Biosil, Optil)

clay paints: Volvox clay paint

lime paints: Haga lime paint

Top coats only with prior test:

mineral coatings (plasters) such as clay, lime or pure silicate

Product data sheet Installation instructions

Technical data

container size: 1 litre

color: black

SD value: (DIN EN ISO 7783-2) 0.1 m

pH value: 8

adhesive pull strength: 7,5 N/mm²

viscosity: 1400 mPas

density: 1.25 kg/litre

composition: water, natural graphite, pure acrylic dispersion, carbon black, additives, preservative (BIT, INN, MIT), VOC: 0.18 g/litre

preservative: 64 ppm BIT; 34 ppm INN; 3 ppm MIT

yield interior: 4 sqm/litre; 8 sqm/litre

ground: stable, non-greasy surfaces, MFT 5 °C

further processing at temperature: after about 24 hours, > 5 °C

durability: 12 months (cool but frost-free (> 5 °C), avoid direct sunlight)

frost resistance: 5 cycles

basis for inspection: IEEE Standard 299™-2006

fire behaviour: DIN EN 13501-1

shield attenuation: 4 sqm per litre - max. ~ 52 dB (single layer); max. ~ 83 dB (double layer); max. ~ 85 dB (triple layer)

shield attenuation: 8 sqm per litre - max. ~ 39 dB (single layer); max. ~ 60 dB (double layer); max. ~ 74 dB (triple layer)