Skip to main content Skip to search Skip to main navigation

Power cord white>> GAL SZ 2.0 ws - cord switch

Product information "Power cord white>> GAL SZ 2.0 ws - cord switch"

  • very flexible and pliable cable for non-stationary electrical loads with intermediate cord switch
  • connection of lamps and other movable devices
  • plastic-coated aluminium strip, two-wire copper min. 0.34 mm²
  • screen (alternating electric field, 50 Hz mains voltage)
  • reduction of the alternating magnetic field through twisting
  • protection class 1 - with PE protective wire

Shielded flexible cable for connecting movable devices incl. moulded Schuko plug on one side and two-pole intermediate cord switch.

The intermediate cord switch disconnects the following electrical device 100% from the mains, no alternating electrical field remains. The voltage is switched off, regardless of the plug position in the socket. In addition, the 2-pole switch prevents stand-by current in appliances without a „real off switch", saving you electricity and therefore money.

Please note that the shielding wire may only be connected on one side. With this cable, the shielding wire (fine-stranded) is already connected to the plug. It is insulated accordingly on the open cable side and not connected. See diagram.

  
Technical data
length: 2,0 metre
colour: white
cross-section: 3 x 0,75 mm² + shielding wire fine wire
diameter: 6,6 mm ± 0,2 mm
load: (max.) 6 A acc. IEC 320-1
intermediate cord switch: 2-pole cut-offmounted approx. 30 cm from the end
insulation cable: Shield: polyvinyl chlorideplastic-coated aluminium strip, two-wire Cu min. 0.34 mm² fine wire
operating voltage: (max.) 250 VAC / 50 Hz
reduction of alternating magnetic field: beat 15 (single wires twisted against each other 15x per metre)
protection class: 1 (with protective wire)
angle protection-contact plug: moulded, CEE-Norm 7/VII, DIN 49441
free line end: stripped approx. 70 mm, with wire end ferrules