41-4303--Cladding circuit cable (N)HXMH-(St)-J 3x1,5mm² - 25 Metre role

€82.41

Available, delivery time: 1-3 days

Stk

Product number: 16

Product information "41-4303--Cladding circuit cable (N)HXMH-(St)-J 3x1,5mm² - 25 Metre role"

Installation cables for effective limitation of alternating electric fields
no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low
does not contain plasticisers

The temperature range (not moved) is
- 40 ºC to max. + 70 ºC, during installation
+ 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive).

The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions).

The alternating electric field is measured in volts per metre, or V/m for short.

Product data sheet

Technical data

length: 25 metre

colour: light gray RAL 7035

cross sections / Ø: 3 x 1,5 mm² - Ø 10,4 mm ± 0,2 mm + shielding wire 1,0 mm²

bending radius: according to DIN VDE 0298, unmoved ca. 4 x diameter

composition: core insulation, halogen-free (cross-linked PE polyethylenen 2XI1) according to DIN VDE 0276 Teil 604 Sheath: plastic inner sheath and outer sheath halogen-free PE polymer mixture HM2 according to DIN VDE 0250 Teil 214 - Polymers PE-EVA mixture Granules - Flame retardant Aluminium trihydroxide (ATH) Powder. No plasticisers.

wires: bare conductor, single wire

load: (max.) 250 VAC / 50Hz

protection class: 1 - according to DIN VDE 0295

testing: DIN VDE 0472, part 266-2-4 test type C or IEC 332.3TCO‘99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions)