IEC Power Cable & Grounding Cable
Plug Adapter 2-Pole
adapter plug with 2-pole switch very small design The U-Steck adapter plug is used for 2-pole disconnection of critical or permanent loads. The U plug adapter is always used when it is not possible to completely disconnect a critical or permanent consumer from the mains. Example: Floor lamp with dimmer in the supply cable. This dimmer does not disconnect the load from the mains and thus prevents the automatic disconnection of the field disconnection switch from the Nefa 16-plus and NA 16 series. To remedy this, the U-Steck adapter plug is simply plugged in between the existing earthed socket and the luminaire. Manual actuation of the switch on the intermediate plug enables safe disconnection of the consumer and ensures automatic function of the field disconnector.
IEC C13 Power Cord black 2.0 m
very flexible and pliable cable for non-stationary electrical loads connection of lamps, monitors, computers, printers, copiers, mobile devices and much more plastic-coated aluminium strip, two-wire copper min. 0.34 mm² fine wire shielding (alternating electric field, 50 Hz mains voltage) reduction of the alternating magnetic field through twisting protection class 1 - with PE protective wire Shielded flexible cable for connection of mobile devices moulded Schuko plug and cold appliance socket. The cold appliance connection cable KGL 2.0 is preferably used for additional shielding of PCs and peripheral devices such as printers, monitors, scanners and the like.
IEC C13 to C5 Adapter
C13 adapter from IEC cable KGL 2.0 to 3-pin socket C5 (notebook), 3-pin --- Protective earth on the unit The two adapters for small appliances (C7 socket) or for portable computers (notebook - C5 socket) are combined into one shielded cable in connection with a cold appliance connection cable. Please always check which of the available socket variants is required for the application.
IEC C13 to C7 Adapter
C13 adapter from IEC cable KGL 2.0 to 2-pole socket C7 (small appliances), 2-pole --- no protective earth on the unit The two adapters for small appliances (C7 socket) or for portable computers (notebook - C5 socket) are combined into one shielded cable in connection with a cold appliance connection cable. Please always check which of the available socket variants is required for the application.
Grounding kit snapbutton
for safe earthing and conduction of shielding textiles (Dali, Picasso, Topas- ST), as well as the shielding fleece (Rubens Light) and loosely laid building fabrics (Adamantan 003) transparent earthing cable with attached snap fastener for fixed wiring The earthing set-B consists of a 3.5 metre long transparent earthing cable with a push button and a wire end sleeve at each end. The push button has an enlarged contact surface for better contact with the umbrella material. The wire end sleeve attached to the end is used for fixed wiring at the points provided for this purpose in the electrical installation (socket, fuse box, FPA rail). IMPORTANT! The necessary installation must be carried out by a qualified electrician. A residual current circuit breaker (FI, RCD ≤ 30mA) must be present in the circuit. This device is a standard part of every electrical installation and will be installed by your electrician if not available. All electrical work (work on electrical equipment and installations) must be carried out and inspected by a qualified electrician or under their direction and supervision! Only use the earthing set in normally tempered, dry indoor rooms. Do not use outdoors!
Socket Grounding Adapter 4-Way
grounding plug for earthed sockets (Schuko) grounding system for use with versatile different grounding cables connection of up to four grounding cables Personal protection in accordance with DIN VDE 0100 For earthing with earthing cable ESR-DK, ESR-ST, ESR-USB + Accessories IMPORTANT NOTICE! Safety-related protective conductor connection. Connection and disconnection only by qualified service personnel! The corresponding circuit may only be operated with a residual current circuit breaker smaller than 30mA (FI or RCD).
Grounding Cable Snap Button 3.5 m
Personal protection in accordance with DIN VDE 0100 For earthing desks and other metal parts Length 3.5 m + Accessories
Grounding Cable Ring Terminal 3.5 m
Personal protection in accordance with DIN VDE 0100 For earthing desks and other metallic parts Length 3.5 m
USB Grounding Cable Notebook 3.5 m transp.
For grounding notebooks and other devices with USB connection Length 3.5 m + Accessories
USB Grounding Cable white 2 m
Safe grounding for notebooks, routers, etc. PVC insulated grounding cable with attached standard USB-A plug, including USB-A => USB-C adapter. For easy plugging into a socket in grounded circuits (TN-S + TT), fused with 30 mA (RCD) The USB grounding cable consists a 2-metre-long white PVC-coated grounding cable with a grounding three pole plug (grounding only/PE) and a USB plug (grounding only) at each end. The USB plug is to insert into a free slot on the notebook or other devices. This connects the mainboard grounding (0) to the equipotential bonding and reducing the alternating electric fields. The 3-pole plug at the other end is plugged into a specified socket.
USB Grounding Cable black 2 m
Safe grounding for notebooks, routers, etc. PVC insulated grounding cable with attached standard USB-A plug, including USB-A => USB-C adapter. For easy plugging into a socket in grounded circuits (TN-S + TT), fused with 30 mA (RCD) The USB grounding cable consists a 2-metre-long black PVC-coated grounding cable with a grounding three pole plug (grounding only/PE) and a USB plug (grounding only) at each end. The USB plug is to insert into a free slot on the notebook or other devices. This connects the mainboard grounding (0) to the equipotential bonding and reducing the alternating electric fields. The 3-pole plug at the other end is plugged into a specified socket.
IEC Power Cable & Grounding Cable
Application:
EMF shielding solutions for offices and workplaces are designed to minimise low-frequency electric fields and high-frequency electromagnetic radiation in the immediate working environment. Typical measures include shielded power cables, power strips and modular power distribution systems. Additional solutions, such as shielding fabrics and desk shielding products, can help to create a structured, low-EMF workspace. These solutions can be easily integrated into both home offices and professional working environments.
Benefits:
An optimised, low-EMF workplace can contribute to a more comfortable and focused working environment. By reducing electromagnetic interference and minimising unwanted electric and high-frequency fields, the workspace can feel calmer and more organised. Using appropriate EMF measuring equipment allows the effectiveness of shielding measures to be evaluated and optimised as needed. The result is a professional workplace shielding concept that supports concentration, productivity and overall comfort in the workplace.