shielded socket strip for shielding low-frequency electrical fields and reducing alternating magnetic fields two-pole disconnection of the four socket inserts incl. child safety lock and decoupling filter The shielded socket strip STL4 is a very high-quality processed socket strip for the reduction of low-frequency electrical alternating fields and energy consumption.   The shielded socket strip STL4 is preferably used for 2-pole disconnection and for operating several devices. This means that even if the plug is turned 180 ° in the socket, the voltage is always switched off. A special advantage when using the STL4 socket strip is the 2-pole disconnection. This guarantees smooth operation of all automatic field disconnectors, such as the devices of the NA-16 series. The 2-pole switch and child protection add safety aspects to the shielding effect. Use of socket strips with 2-pole switch: By using switchable power strips, several devices can be connected together (PC, hi-fi systems, etc.) and disconnected from the mains conveniently and together at the flick of a switch. If there is a need for continuous power for devices with programmed data or necessary accessibility (e.g. fax, telephone system, video recorder), you can use socket strips with combined switchable and non-switchable inserts like STL6PC. If your strip is additionally shielded, the alternating electric field is minimised to below 1-2 volts/metre (V/m) - the recommended guideline value of building biology is max. 10 V/m. Note: DIN VDE 0100 Part 420 Para. 4.1 (fire hazard in electrical installations) must be particularly observed during use. If the total resistance of the individual plug-in connections exceeds the impedance required for short-circuit protection, it will no longer trip (VDE 0100-410:2007-06, for example, requires short switch-off times of 0.4 s for the TN system). In such cases, the temperature of the pipe can rise to the point of creating a fire source. Therefore, the following applies (to all socket strips, whether shielded or unshielded): do not insert one after the other do not operate covered   

shielded socket strip for shielding low-frequency alternating electric fields two-pole disconnection of four socket outlets plus two socket outlets unswitched incl. child safety lock full electrical protection „PRO-TECTOR", mains filter and high-frequency filter The shielded socket strip STL6PC is a very high-quality processed socket strip for the reduction of low-frequency electrical alternating fields and energy consumption. The shielded socket strip STL6PC is preferably used for 2-pole disconnection and for operating several devices especially for computer workstations.  A particular advantage of using the STL6PC socket strip is the possibility of switching off all PC components (four black socket inserts) while simultaneously operating telephone systems or fax machines at night using the two unswitched socket inserts (grey). In addition, this power strip has overvoltage protection to protect the connected end devices. Use of socket strips with 2-pole switch: By using switchable power strips, several devices can be connected together (PC, hi-fi systems, etc.) and disconnected from the mains conveniently and together at the flick of a switch. If your strip is additionally shielded, the alternating electric field is minimised to below 1-2 volts/metre (V/m) - the recommended guideline value of building biology is max. 10 V/m.   

shielded socket strip for shielding low-frequency electrical fields and reducing alternating magnetic fields two-pole disconnection of the four socket inserts incl. child safety lock and decoupling filter The shielded socket strip STL9 is a very high-quality processed socket strip for the reduction of low-frequency electrical alternating fields and energy consumption.   The shielded socket strip STL9 is preferably used for 2-pole disconnection and for operating several devices. This means that even if the plug is turned 180° in the socket, the voltage is always switched off. A special advantage when using the STL9 socket strip is the 2-pole disconnection. This guarantees smooth operation of all automatic field disconnectors, such as the devices of the NA-16 series. The 2-pole switch and child protection add safety aspects to the shielding effect. Use of socket strips with 2-pole switch: By using switchable power strips, several devices can be connected together (PC, hi-fi systems, etc.) and disconnected from the mains conveniently and together at the flick of a switch. If there is a need for continuous power for devices with programmed data or necessary accessibility (e.g. fax, telephone system, video recorder), you can use socket strips with combined switchable and non-switchable inserts like STL6PC. If your strip is additionally shielded, the alternating electric field is minimised to below 1-2 volts/metre (V/m) - the recommended guideline value of building biology is max. 10 V/m.   

mounting bracket for socket strips STL can be mounted flat or at an angle stainless steel The STL-WI mounting brackets are ideal for fixed mounting of the STL4, STL6PC and STL9 socket strips. They can be mounted flat or at an angle on or under a desk. Wall mounting is also possible. Two brackets are always supplied to match the socket strips.