Installation cables
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
Installation cables for effective limitation of alternating electric fields no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low does not contain plasticisers The temperature range (not moved) is - 40 ºC to max. + 70 ºC, during installation + 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive). The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions). The alternating electric field is measured in volts per metre, or V/m for short.
for the safe insulation of shielding wires of shielded installation cables. for marking accessory sockets with shielding wire for insulating shielding wires and grounding wires from shielding surfaces in the distributor to the FPA rail The ISO-S-FPA insulating tube is used in accordance with the new DIN EN 60445 (VDE 0197) guideline for insulating shielding wires for functional potential bonding. This ensures that no electrically conductive contact can be made with other live parts (short circuit!) and that functional grounds are detected immediately.
for the safe insulation of shielding wires of shielded installation cables. for marking accessory sockets with shielding wire for insulating shielding wires and grounding wires from shielding surfaces in the distributor to the FPA rail The ISO-S-FPA insulating tube is used in accordance with the new DIN EN 60445 (VDE 0197) guideline for insulating shielding wires for functional potential bonding. This ensures that no electrically conductive contact can be made with other live parts (short circuit!) and that functional grounds are detected immediately.
Installation cables
Application:
Shielded installation cables are installed in the same way as conventional electrical wiring. They are used in walls, ceilings, conduits and other building installations. Designed to reduce low-frequency electric fields generated by electrical systems, they are particularly recommended for bedrooms, living areas, offices and other spaces where a low-EMF environment is desired. In timber-frame and wooden buildings, using shielded installation cables throughout the building is especially beneficial, as electrical fields can otherwise spread through the wooden structure and affect larger areas.
Benefits:
The integrated shielding significantly reduces the emission of low-frequency electric fields, all while ensuring the electrical installation remains fully functional and safe. This helps to create a calmer and more comfortable living environment, and reduces exposure to electromagnetic fields (EMF). In lightweight construction methods, particularly timber construction, shielded installation cables help minimise field propagation throughout the building structure. When combined with shielded outlets, junction boxes and power disconnect switches, they form the basis of a comprehensive low-EMF electrical installation concept for healthy homes, bedrooms, offices, schools and other sensitive environments.