shielded extension cable for shielding low-frequency electric and magnetic alternating fields very flexible and pliable cable for non-stationary electrical loads plastic-coated aluminium strip, two-wire copper 1.0 mm² fine wire screen (alternating electric field, 50 Hz mains voltage) reduction of the alternating magnetic field through twisting protection class 1 - with PE protective wire The shielded extension cables VK are very high quality processed cables with Schuko plug and Schuko socket for the reduction of low-frequency electric and magnetic alternating fields.   With some socket strips and extension cables available on the market, the cross-section of the cable (and thus the current-carrying capacity) is only designed for 1.00 mm², and the permissible limit temperature under load can be exceeded. Prefer connecting cables with a cross-section of 1.5 mm2 so that the fuse can blow in the event of a short circuit. Prefer devices with protection class 1. Protection class 1 (or protective grounding) means that all metal parts of a devices / lamps are connected to protective ground. Alternating electric fields are thus shielded and diverted. Products of protection class 1 always have a three-pole earthing contact plug and are thus connected to the protective earth conductor of the building installation (three-pole: current wire, neutral wire, protective earth wire).   

shielded extension cable for shielding low-frequency electric and magnetic alternating fields very flexible and pliable cable for non-stationary electrical loads plastic-coated aluminium strip, two-wire copper 1.0 mm² fine wire screen (alternating electric field, 50 Hz mains voltage) reduction of the alternating magnetic field through twisting protection class 1 - with PE protective wire The shielded extension cables VK are very high quality processed cables with Schuko plug and Schuko socket for the reduction of low-frequency electric and magnetic alternating fields.   With some socket strips and extension cables available on the market, the cross-section of the cable (and thus the current-carrying capacity) is only designed for 1.00 mm², and the permissible limit temperature under load can be exceeded. Prefer connecting cables with a cross-section of 1.5 mm2 so that the fuse can blow in the event of a short circuit. Prefer devices with protection class 1. Protection class 1 (or protective grounding) means that all metal parts of a devices / lamps are connected to protective ground. Alternating electric fields are thus shielded and diverted. Products of protection class 1 always have a three-pole earthing contact plug and are thus connected to the protective earth conductor of the building installation (three-pole: current wire, neutral wire, protective earth wire).   

shielded extension cable for shielding low-frequency electric and magnetic alternating fields very flexible and pliable cable for non-stationary electrical loads plastic-coated aluminium strip, two-wire copper 1.0 mm² fine wire screen (alternating electric field, 50 Hz mains voltage) reduction of the alternating magnetic field through twisting protection class 1 - with PE protective wire The shielded extension cables VK are very high quality processed cables with Schuko plug and Schuko socket for the reduction of low-frequency electric and magnetic alternating fields.   With some socket strips and extension cables available on the market, the cross-section of the cable (and thus the current-carrying capacity) is only designed for 1.00 mm², and the permissible limit temperature under load can be exceeded. Prefer connecting cables with a cross-section of 1.5 mm2 so that the fuse can blow in the event of a short circuit. Prefer devices with protection class 1. Protection class 1 (or protective grounding) means that all metal parts of a devices / lamps are connected to protective ground. Alternating electric fields are thus shielded and diverted. Products of protection class 1 always have a three-pole earthing contact plug and are thus connected to the protective earth conductor of the building installation (three-pole: current wire, neutral wire, protective earth wire).   

shielded extension cable for shielding low-frequency electric and magnetic alternating fields very flexible and pliable cable for non-stationary electrical loads plastic-coated aluminium strip, two-wire copper 1.0 mm² fine wire screen (alternating electric field, 50 Hz mains voltage) reduction of the alternating magnetic field through twisting protection class 1 - with PE protective wire The shielded extension cables VK are very high quality processed cables with Schuko plug and Schuko socket for the reduction of low-frequency electric and magnetic alternating fields.   With some socket strips and extension cables available on the market, the cross-section of the cable (and thus the current-carrying capacity) is only designed for 1.00 mm², and the permissible limit temperature under load can be exceeded. Prefer connecting cables with a cross-section of 1.5 mm2 so that the fuse can blow in the event of a short circuit. Prefer devices with protection class 1. Protection class 1 (or protective grounding) means that all metal parts of a devices / lamps are connected to protective ground. Alternating electric fields are thus shielded and diverted. Products of protection class 1 always have a three-pole earthing contact plug and are thus connected to the protective earth conductor of the building installation (three-pole: current wire, neutral wire, protective earth wire).