Skip to main content Skip to search Skip to main navigation

Guard contact extension accessory >>VK 3,0 ws

Product information "Guard contact extension accessory >>VK 3,0 ws"

  • shielded extension cable for shielding low-frequency electric and magnetic alternating fields
  • very flexible and pliable cable for non-stationary electrical loads
  • plastic-coated aluminium strip, two-wire copper 1.0 mm² fine wire
  • screen (alternating electric field, 50 Hz mains voltage)
  • reduction of the alternating magnetic field through twisting
  • protection class 1 - with PE protective wire

The shielded extension cables VK are very high quality processed cables with Schuko plug and Schuko socket for the reduction of low-frequency electric and magnetic alternating fields.  

With some socket strips and extension cables available on the market, the cross-section of the cable (and thus the current-carrying capacity) is only designed for 1.00 mm², and the permissible limit temperature under load can be exceeded. Prefer connecting cables with a cross-section of 1.5 mm2 so that the fuse can blow in the event of a short circuit.

Prefer devices with protection class 1. Protection class 1 (or protective grounding) means that all metal parts of a devices / lamps are connected to protective ground. Alternating electric fields are thus shielded and diverted. Products of protection class 1 always have a three-pole earthing contact plug and are thus connected to the protective earth conductor of the building installation (three-pole: current wire, neutral wire, protective earth wire).

  
Technical data
length: 3,0 Metre
colour: white
insulation cable: Shield: polyvinyl chlorideplastic-coated aluminium strip, two-wire Cu fine wire 1.0 mm²
operating voltage: (max.) 250 VAC / 50Hz
load: (max.) 16A acc. to IEC 320-1
reduction of alternating magnetic field: Beat 15 (single cores twisted against each other 15x per metre)
protection class: 1 (with protective wire)
cross-section: 3 x 1.5 mm² + shielding wire fine wire 1.0 mm²
diameter: Ø 8,4 mm ± 0,2 mm
angle protection-contact plug, socket: moulded, CEE-Norm 7/VII, DIN 49441