Installation Cable NHXMH-St-J 3x1,5 mm² 100 m

€235.62

Copper surcharge (daily rate)

€68.00 per 100 m (€0.68/m)

The copper surcharge is calculated automatically based on the ordered quantity and shown separately in the shopping cart.

Available, delivery time: 1-3 days

Stk

Product number: 258

Why a copper surcharge?
Copper is a key raw material used in electrical cables. As its market price fluctuates daily, the material cost of a cable can also vary.

Calculated using current market prices
The copper surcharge is calculated based on the current daily copper market price and updated regularly. This ensures that prices always reflect the latest raw material costs.

Transparent pricing
By listing the copper surcharge separately, the base price of the cable remains transparent. You only pay the current, actual cost of the copper contained in the product.

Product information "Installation Cable NHXMH-St-J 3x1,5 mm² 100 m"

Installation cables for effective limitation of alternating electric fields
no corrosive/narcotic gases are produced in the event of fire. Smoke development remains low
does not contain plasticisers

The temperature range (not moved) is
- 40 ºC to max. + 70 ºC, during installation
+ 5 ºC to max. + 70 ºC. Outdoor installation is only possible if the cable is not exposed to direct sunlight. Use in hazardous areas is not permitted. The product conforms to the 73/23/EEC Directive (Low Voltage Directive).

The screening is checked according to TCO'99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions).

The alternating electric field is measured in volts per metre, or V/m for short.

Technical data

length: 100 metre

colour: light gray RAL 7035

cross sections / Ø: 3 x 1,5 mm² - Ø 10,4 mm ± 0,2 mm + shielding wire 1,0 mm²

bending radius: according to DIN VDE 0298, unmoved ca. 4 x diameter

composition: core insulation, halogen-free (cross-linked PE polyethylenen 2XI1) according to DIN VDE 0276 Teil 604 Sheath: plastic inner sheath and outer sheath halogen-free PE polymer mixture HM2 according to DIN VDE 0250 Teil 214 - Polymers PE-EVA mixture Granules - Flame retardant Aluminium trihydroxide (ATH) Powder. No plasticisers.

wires: bare conductor, single wire

load: (max.) 250 VAC / 50Hz

protection class: 1 - according to DIN VDE 0295

testing: DIN VDE 0472, part 266-2-4 test type C or IEC 332.3TCO‘99, Volume I (MPR II) and DIN EN 50279 (measuring distance 30 cm, measurement against earth, free cable run over several metres, no connection areas, field-free laboratory conditions)